Theses/Dissertations from 2017
Beswick-Honn, Jessica Marie (2017), Evaluation of low-cost hydrogen sulfide monitors for use in agriculture
Brandon, Nicole Marie (2017), Toxicokinetics of intratracheally instilled 14C-labeled PCB28
Dausman, Taryn Bette Catherine (2017), Low cost air quality monitors in agriculture
De Vito, Christie (2017), Comparison of personal attenuation ratings attained by agricultural and industrial workers for four hearing protection types using the 3M E-A-RFIT dual validation system
Hallett, Laura Ann (2017), Design and laboratory evaluation of an inexpensive noise sensor
Holder, Craig Alan (2017), Investigation of exposure assessment methods and filtration of carbon nanotubes
Kersten, Joshua Todd (2017), Measuring manufacturing assembly worker task duration with radio frequency identification technology
Knowlton, Samantha Dawn (2017), Measuring bioaerosol concentrations generated from toilet flushes during hospital-based patient care
McCollom, Theresa Iren Szabo (2017), Design and evaluation of a high-flowrate nanoparticle respiratory deposistion (NRD) sampler
Rudolphi, Josie M. (2017), Occupational safety & health of young adult agricultural workers
Thedell, T. Aron (2017), Comparisons of a novel industrial hygiene filter material, wash solutions, and extraction methods in the detection and quantification of influenza virus
Tompkins, Abigail Vonne (2017), Evaluation of a prototype inhalable sampler: metal aerosols
Theses/Dissertations from 2016
Crawford, Kathryn J. (2016), Assessment of noise in a medical intensive care unit
Gross, Nathan Alan (2016), Work-related injuries in a midwestern manufacturing facility
Johannes, Ashlee (2016), Health of migrant and seasonal farmworkers in Iowa
Sanyang, Edrisa (2016), Risk factors and injury characteristics among trauma patients in the Gambia
Stark, Aimee Lizabeth (2016), Characterization of sand processed for use in hydraulic fracture mining
Wentworth, Leah Marie (2016), Suicide prevention and the workplace
Williams Ischer, Sarah Ashlee (2016), Evaluation of a sprinkler cooling system on inhalable dust and ammonia concentrations in broiler chicken production
Theses/Dissertations from 2015
Butler-Dawson, Jaime Lorin (2015), Pesticide exposure, risk factors, and neurobehavioral performance among vulnerable populations
Gassman, Richard (2015), Effect of dust filtration control on CO2 and NH3 concentrations in a swine farrowing room
Kienlen, Laura L. (2015), Comparison of bioaerosol collection methods in the detection of airborne influenza virus
Mines, Levi Walden Dyer (2015), Porous polyurethane foam for use as a particle collection substrate in a Nanoparticle Respiratory Deposition Sampler
Ramirez, Joel Amilcar (2015), Evaluation of particle penetration and breathing resistance of N95 filtering face-piece respirators and uncertified dust masks
Yang, Anthony Yuan-Jung (2015), Effect of heater type on CO/CO2 concentrations in a farrowing barn
Theses/Dissertations from 2014
Dhakal, Kiran (2014), Sulfate conjugates are metabolite markers of inhalation exposure to 4-chlorobiphenyl (PCB3)
Girlando, Elanie Michelle (2014), Sampling for airborne influenza virus using RNA preservation buffer : a new approach
Greenan, Mitchell Joseph (2014), The effects of roadway characteristics on farm equipment crashes: a GIS approach
Green, Deirdre Renee (2014), Occupational noise exposures of college town restaurant employees
Meppelink, Shannon M. (2014), Certified safe farm injuries as they pertain to chronic disease
Ringgenberg, Wendy Jeannette Wehrman (2014), Trends and characteristics of occupational suicide and homicide in farmers and agriculture workers, 1992-2010
Sawvel, Russell (2014), Evaluation of shaker dust collector for use in a swine farrowing barn
Theses/Dissertations from 2013
Anderson, Kimberly Rose (2013), Quantifying Uncertainty in Low Velocity Human Aspiration Studies: Effect of Secondary Aspiration and Thin-walled Reference Sampling in Low Velocity Conditions
Coleman, Kristen (2013), Detection of silica particles in lung tissue of non-occupationally exposed individuals by computer controlled scanning electron microscopy
Determan, Emily Marie (2013), Variability in muscle activity measurements among clinical ophthalmologists
Gallagher, Michael James (2013), Evaluation of pulmonary function cross-shift changes in dairy parlor workers using spirometry & exhaled nitric oxide
Getschman, Benjamin John (2013), Evaluation of the validity of the inhalable and "total" dust concentration ratio
Hoppe, Kimberly Ann (2013), Bioaerosol exposure assessment and the Limulus amoebocyte lysate assay
Horne, Adrianne (2013), An investigation of carbon nanotube exposure assessment methods
Hornick, Madeleine Kathleen (2013), Evaluating exposures to inhalable dust among dairy parlor workers
Leach, William Andrew (2013), Effect of deposited polydispersed particles on respirable cyclone penetration
Lebeck, Mark Gordon A. (2013), Building the case for residential herbicide exposure assessments in Iowa communities
Mills, Jessica Breyan (2013), Evaluation of the DiSCmini personal aerosol monitor for submicrometer sodium chloride and metal aerosols
Sawvel, Eric J. (2013), Use Of passive samplers to characterize the spatial heterogeneity of coarse particle mass concentration and composition in Cleveland, OH
Theses/Dissertations from 2012
Barros, Nirmalla (2012), Predictability of radon airborne measurements based on surrogate measures
Capuano, Ana W. (2012), Constrained ordinal models with application in occupational and environmental health
Ferguson, Dwight Deon (2012), Assessment and mitigation of airborne transmission of methicillin-resistant Staphylococcus Aureus in animal feeding operations and the outdoor environment
Hill, Barry Keith (2012), Field portable X-Ray fluorescence for rapid analysis Of titanium dioxide on air filters
Huang, Guannan (2012), Evaluation of airborne particle emissions from commercial products containing carbon nanotubes
Pavilonis, Brian Thomas (2012), Rural air quality and respiratory health
Reeve, Kelsie Ann (2012), Wintertime factors affecting contaminant distribution in farrowing barns
Theses/Dissertations from 2011
Cao, Yanyan (2011), An epidemiological analysis of a university threat assessment team case load
Cena, Lorenzo (2011), Assessment of exposure to composite nanomaterials and development of a personal respiratory deposition sampler for nanoparticles
Ellickson, Daniel Emick (2011), Assessment of microscopy methods for distinguishing engineered nanoparticles from incidental nanoparticles
Hibbs, Matthew Lucas (2011), Capture velocity with slot entry to conical hood
Humann, Michael Jerome (2011), Hearing loss and task-based noise exposures among agricultural populations
Kang, Mitchell (2011), Assessment of NIOSH-approved N95 filter performance against varying conditions
Kleinschmidt, Travis Lee (2011), Modeling hydrogen sulfide emissions: are current swine animal feeding operation regulations effective at protecting against hydrogen sulfide exposure in Iowa?
Krzystowczyk, Jacob Alexzander (2011), Exposure assessment for automotive repair tasks in an attached garage
Mikulski, Marek Andrzej (2011), Epidemiology of beryllium sensitization and pneumoconiosis in the population of former nuclear weapons workers and current and former conventional munitions workers from the Iowa Army Ammunition Plant (IAAAP) in Burlington, Iowa
Saleh, Sabah Khalid (2011), A device to validate concentration measured by direct reading instruments for aerosols
Theses/Dissertations from 2010
Anderson, Kimberly Rose (2010), Computational fluid dynamics (CFD) study investigating the effects of torso geometry simplification on aspiration efficiency
Leedom Larson, Kerry Reah (2010), Methicillin-resistant Staphylococcus aureus in pork production facilities: occupational exposures and infections
Lozier, Matthew Joiner (2010), Determinants of Atrazine contamination in Iowa homes and occupational exposure in Central America
Meyers, Alysha Rose (2010), Prevention strategies for musculoskeletal disorders among high-risk occupational groups
Newnum, Justin Dale (2010), The effects of relative humidity on respirator performance
Shamsul, Ramesh Zakir bin (2010), Video exposure monitoring as a tool in workplace exposure assessment
Suh, Yang-Won (2010), An investigation of the phototoxicity of decabromodiphenyl ether and triclosan
Vosburgh, Donna Jean Holzer (2010), Use of direct-reading instruments for measuring airborne nanoparticles in the workplace
With the growing importance of oil and gas reserves throughout the world, the field of oil and gas health and safety has attracted attention of researchers and academician as wells. Poor knowledge of health and safety regulations and the failure to employ appropriate safety practices have resulted in oil spills and deadly accidents in the past. Although, the overall safety standards have developed tremendously with time, there is still considerable room for improvement. This article aims to list out dissertation topic suggestions for both undergraduate and graduate students who are interested in taking up oil and gas health and safety as their subject of research. Below, you will find oil and gas health and safety dissertation titles on the most current issues of the industry. If these does not interest you then you can also consider oil and gas management dissertation topics.
Oil and Gas Dissertation Topics
Current challenges facing the oil and gas industry in terms of health and safety
- To investigate the impact of culture and traditions on the overall health and safety performance of the oil and gas sector – A case study of any large multinational oil and gas company.
- To determine the impact of the lack of professional training for industrial workers on the health and safety performance of oil and gas sector with focus on developing countries.
- To discuss and investigate the differences in beliefs, perceptions, and attitudes between different companies, cultures, regulatory bodies, countries and companies with focus on health and safety.
- Multiculturalism in oil and gas sector and its relationship with the health and safety performance.
Compliance with the Health and Safety Regulations
- To investigate the health and safety practices followed by the Total Group which is considered as one of the largest oil and gas companies in the world – An analysis of their operations both offshore and onshore to determine how the company incorporates health and safety standards.
- What is more important – Compliance to societal commitment or legislation – A case study of the Royal Dutch Shell Group.
More Dissertation Topics in Oil and Gas
Evolution of oil and gas industry over the years with growing importance of health and Safety Standards
- Application of health and safety regulations in foreign countries (with focus on developing countries) where issues of application for MNEs are different than those in the UK.
- A critical analysis of the legislative requirements for compliance with health and safety standards in the UK oil and gas industry with particular focus on Safety Case Regulations and the Health and Safety at Work Act.
The growing importance of corporate social responsibility in the oil and gas sector in developing regions of the World
- To investigate the impact of oil and gas industrial operations on the health and safety of the surrounding community – A case study of any developing country such as Kazakhstan.
- Compliance to international oil and gas health and safety regulations in developing countries – A case study of any multinational oil and gas company successfully running oil and gas operations in a developing country.
- A critical analysis of international environmental standards and oil and gas health and safety standards for oil and gas companies operating in a developing country.
Strategies employed by oil and gas companies to comply with health and safety regulation in offshore oil and Gas Processes
- To examine the various strategies employed by large oil and gas companies in order to implement health and safety standards within their industrial processes.
About Research Prospect
Research Prospect Pvt Ltd is UK’s best academic writing service. All of our writers hold Master’s or PHD degrees from highly recognized UK Universities. Our services include but not limited to research paper writing, dissertation writing, literature review writing, partial dissertation writing, statistical analysis, andcoursework writing.